Marmitek SPEAKER ANYWHERE 400, User Manual

Page: 5 / 44

E
N
G
LI
S
H
5 Speaker Anywhere 400™
Speaker receivers
[6] Speaker on/off button
[7] Atmospheric lighting on/off button “Light”
[8] Automatic frequency tuning button “Tune”
[9] Volume button “+ / - “
[10] Battery cover
[11] Power connection
“DC IN”
[12] Atmospheric lighting
At the bottom of the wireless speaker you can find a sticker with an “L” (left) or an “R” (right).
These correspond with the left (white) and right (red) AUDIO input [1] on the transmitter.
1. The speakers are dual power:
a. With batteries
Insert 6 pieces ‘D’ size ALKALINE batteries (not included) into the battery compartment with
correct polarity. For using the batteries, make sure the Power adapter is not connected. Note:
Remove the batteries when they are empty of if you are not using the device for a longer
period.
b. With supplied power adapter
Connect the power adapter to the Power connection [11] on the rear of each speaker, then
plug it to the electrical wall outlet.
Note: batteries will not be charged by the speaker.
2. Turn on the speakers by pushing the
button [6]. The blue signal LED now lights up.