Marmitek IRRF7243, Operating Instructions Manual

Page: 4 / 20

• Sends signals to Modules over your electrical wiring. (No additional wiring required)
• Turns off everything in the system with one button.
2. Installation
The Mini Controller
Installation of your Mini Controller is easy, simply follow these steps:
1. Using a small screwdriver, choose one of the 16 letters on the Mini Controller Housecode
Dial. Select the same housecode as you set for the Modules and the remote (RF remote
and Pronto remote).
2. Plug the power cord into any functioning 230 VAC - 50 Hz outlet.
Note:
For RF remote control , if the Mini Controller is set to house code P, then all commands
coming from a remote control will be converted to powerline carrier using the house code set
in the remote. When you press on a front panel key of the Mini Controller, the house code P
will be transmitted.
For PRONTO remote control : If the Mini Controller is set to house code P, then all
commands coming from a Pronto remote control will be converted to powerline using the
house code you set in the house code screen of a Pronto remote. When you press a front
panel key of the Mini Controller, the housecode P will be transmitted.
Setting up your X10 Infrared Remote Control:
To control X10 device you need to enter the Home Automation code in your X-10 remote.
You can find this code in the Code Book of your remote control.
To enter the code, please refer to the user guide of your remote control (same procedure as
the setting of a VCR or SAT ... code). Note that you need to dedicate one mode key of your
remote control to this home automation code.
For a non X10 remote control, please refer to its user guide and code list.
3. Control with your IR Remote Control
To Turn On / Off a Light or Appliance:
1. Aim the remote at the front plate of the Mini Controller.
2. Press the mode key dedicated to HomeAutomation on your remote control.
3. Press the Module’s Unit Code (1-9) on the numeric keypad of your remote control.
4. Press Channel up/ down to turn it on/off on your remote control.
4 MARMITEK