Marmitek IRRF7243, Operating Instructions Manual

Page: 6 / 20

For X10 IR/RF Universal Remote Control set to RF:
1. Press the mode key dedicated to HomeAutomation on your remote control.
2. Press the Module’s Unit Code (1-16).
3. Press Volume UP/DOWN to bright/dim.
5. Control with your Mini Controller
To use the Mini Controller’s Command Center’s control panel:
1. Press and release the on or off side of one of the four number keys corresponding to the
Unit Code set on the Modules to be controlled.
2. To change the light intensity : press on DIM/BRIGTH button (note : this feature works if
your selected lamp is plugged into a "lamp" module)
3. To switch on all the lights : press "ALL LIGHTS ON" button
4. To switch off all the lights and appliances : press "ALL UNITS OFF"
The Selector Switch determines which group of four Unit Codes will be
affected (1-4 or 5-8)..
6 MARMITEK