Page 5 of 7
45DS Electrical Stage Autopilot
Course Computer Installation With ST-60
These 2 terminal connect
to autopilot drive motor
clutch
These 2 terminal connect to autopilot
drive motor for power supply
These 2 terminals are from DC junction
box autopilot breaker ( provide power to
course computer & drive unit)
Connect GPS receiver yel-
low wire to sea talk in termi-
nal, then brown & white
wire to sea talk white color
terminal.
Connect Sea talk wire from DC junction breaker yellow wire to
sea talk out terminal, then black wire to sea talk white color termi-
nal. And bridge red wires of GPS & Sea Talk
Knot
Depth
Wind
E-80 chart plotter locates on electrical panel, E-
120 locates on cockpit center console
