6. Align rear deck ramp pad with the pre drilled hole in the pad and the center of the main deck
stringer inline with the large rivets that attach the decking to the main frame. Set the 2 deck ramp
leveling
spaces under the pad as follows. The 9” piece
s goes on the bottom (beside the side slide out
wing
on the main deck) the 18” pieces goes directly on top of the 9” pieces
(over top of the side wing
decking, to level and support deck ramp pad).
Drill a 9/16” hole (start with
¼”
a pilot hole as you are
drilling thru 5 layers). Install 2
–
6 ¼” bolts (do not tighten).
