14.
Repeat steps 12 and 13 on the remaining 3 tires.(remember to install the spring pin
when using the movable ladder, this is imperative to the strength of the mounting
positions)
15.
Place the removable ladder in the holder on the deck, close the tailgate and
you’re
ready to hit the road.
Unload Instructions with Vehicle Power
1. Remove ramps from deck mount and securely engage onto the rear load bar of the deck.
Align with tire width of vehicle.
2. Use the movable ladder to undo and remove all 4 tire tiedowns as well as winch hook from
winch brace.
(remember to install the spring pin when using the movable ladder, this is
imperative to the strength of the mounting positions)
3. Enter vehicle, close door, apply seat belt, press on the brake start vehicle. Place in reverse and
start to back off slowly. Watch to make sure your tires are lined up when transitioning from the
deck to the ramps. This is easier to achieve with another person helping spot you (but not
necessary)
4. Continue down ramps until vehicle is completely on the ground. Place vehicle in park.
5. Place ramps back on the deck and pin in place with spring pin. Place movable ladder back in
holding position on the deck.
Your Unloaded