INSTALLATION INSTRUCTIONS:
SXS Deck is rated for 2850lbs and loading Ramp 2500lbs
All decks come with serial numbers located on the lower rear leg.
1. Remove the ramp from the deck to lighten the deck
’
s weight.
2. With the assistance of 2-3 others, lift the deck into the back of the truck (approx. weight is 300
lbs without the ramps)
3. Square the deck in the truck box
–
be mindful that most truck boxes are not square and will
taper in the rear. Usually align center of deck to center of cab rear window.
4. Drill a pilot hole through the center of the deck leg mounting hole, and the truck box
–
be
careful to not drill through any fuel lines
.
5. Providing that a pilot hole has clearance underneath the truck, follow the pilot hole with a ½
drill bit.
6. Install
a 1/2” zinc flat washer (the s
maller flat washer) ont
o a 1/2” x 4” zinc plated grade 8
bolt. Thread the bolt through the deck leg, and truck box.
7. On the underside of th
e truck, install the 1/2” lock washe
r & backing plate onto the bolt