12
Spare Parts
SPX Cooling Technologies manufactures and maintains a stock of replacement
parts for all cooling tower mechanical equipment. Shipment of these parts are
normally made within ten days after an order is received. If emergency service
is necessary, contact the local Marley representative for assistance.
To prevent prolonged shutdown periods in case of damage to the mechanical
equipment, it is suggested that the following parts be carried in the owner’s
stock:
• One fan assembly.
• One Geareducer assembly.
• One drive shaft assembly.
Be sure to furnish the tower serial number when ordering parts.
Seasonal Shutdown Instructions
Tower
–Drain all tower piping.
During shutdown, clean the tower and make any necessary repairs. Apply
protective coating as required to all metal parts. Particular attention should be
given to mechanical equipment supports, drive shaft and drive shaft guards.
Mechanical Equipment
Geareducer (shutdown for 3 months or less).
1. Each month, drain water condensate from the lowest point of the Geareducer
and its oil system. Check oil level and add oil if necessary. Operate to recoat
all interior surfaces with oil.
2. At start-up, drain water condensate and check oil level. Add oil if neces-
sary.
Refer to
Geareducer User Manual
for maintenance and lubrication instruc-
tions.
Summary of Contents for Marley Class F400
Page 1: ... Marley Class F400 Cooling Tower User Manual 93 1288A ...
Page 10: ......
Page 11: ......
