background image

8

HOW TO ORDER REPAIR PARTS

In  order  to  obtain  any  needed  repair  or

replacement  parts,  warranty  service  or  technical
information,  please  contact  Marley  Engineered
Products  Service  Center  toll-free  by  calling    1-800-
642-HEAT. 

Part No. 5200-2418-001 

03-02

ECR 35189

LIMITED WARRANTY

All  products  manufactured  by  Marley  Engineered  Products  are  warranted  against  defects  in  workmanship  and  materials  for
eighteen months from date of installation. This warranty does not apply to damage from accident, misuse, or alteration; nor
where the connected voltage is more than 5% above the nameplate voltage; nor to equipment improperly installed or wired or
maintained in violation of the product’s installation instructions. All claims for warranty work must be accompanied by proof of
the date of installation.

The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs, and
shipping costs incurred to return products to Marley Engineered Products Service Center. Within the limitations  of this warranty,
inoperative units should be returned to the nearest Marley authorized service center or the Marley Engineered Products Service
Center, and we will repair or replace, at our option, at no charge to you with return freight paid by Marley. It is agreed that such
repair or replacement is the exclusive remedy available from Marley Engineered Products.

THE ABOVE  WARRANTIES ARE  IN  LIEU  OF ALL OTHER  WARRANTIES  EXPRESSED  OR  IMPLIED, AND ALL IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE AFORESAID
EXPRESSED  WARRANTIES  ARE  HEREBY DISCLAIMED  AND  EXCLUDED  FROM  THIS  AGREEMENT.  MARLEY
ENGINEERED PRODUCTS SHALL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES ARISING WITH RESPECT TO THE
PRODUCT, WHETHER BASED UPON NEGLIGENCE, TORT, STRICT LIABILITY, OR CONTRACT.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.

For the address of your nearest authorized service center, contact Marley Engineered Products in Bennettsville, SC, at 1-800-
642-4328. Merchandise returned to the factory must be accompanied by a return authorization and service identification tag,
both available from Marley Engineered Products. When requesting return authorization, include all catalog numbers shown on
the products.

470 Beauty Spot Rd. East
Bennettsville, SC  29512 USA

Summary of Contents for E3606-1125HFD









Reviews: