Rutland 913 Windcharger Installation & Operation
Doc No:SM-130 Iss. J 15.02.13 6 Marlec Eng Co Ltd
x
The fuse supplied must be fitted to protect the system.
x
The Rutland 913 Windcharger is suitable for sailing boats and some land
based applications. When storm winds are forecast the turbine can be
restrained to minimise wear and tear particularly when installed on land
based applications where Furlmatic model windchargers are normally
recommended. Note that where the manufacturer recommends a furling type
windcharger should have been used the warranty is invalidated in cases of
storm damage.
x
If in doubt, refer to your dealer, a competent electrical engineer or the
manufacturer.
Check You Have Received -
See Rutland 913 Exploded View
x
24 x No. 10x25mm special self-tapping screws
x
1 x fuse and fuse holder
x
1 x main generator assembly
x
6 x aerofoil blades
x
1 x nose cone + 3 x nylon fixing screws
x
1 x 6mm Allen key
x
1 x 2-way terminal block
x
2 x M10 buttoncap screws
x
2 x shakeproof washers
In the event of loss or damage, consult your dealer or the manufacturer.
