Technical Notice CSO/CPO V1.1 / 10.14
Page 75 / 86
Options 9
r2.2
Maximum set point
-
c1.2
Minimum time between successive switch-ons
*(180 sec with a compressor, 30 sec with a
pump and 10 sec with a solenoid valve)
A0.2
Differential between alarms AL and AH
*(=2°C, relative to AL.2 or AH.2)
AL.2
Low Temperature threshold alarm
*(=10°C, relative to set point St2)
AH.2
High Temperature threshold alarm
*(=10°C, relative to set point St2)
Ad.2
Low or high temperature alarms delay at start-up
*(1,200 seconds)
AdL2
Low temperature alarm delay at start-up
-
AdH2
High temperature alarm delay at start-up
-
/c1.2
Probe calibration
-
/3.2 ou C17.2
Refresh time of the sensor
-
For all additional regulators, the incrementation rule governing the number after the ac-
ronym is applied. Ex: St3, rd3, r1.3, r2.3, c1.3, etc.
Code
Description
*Default value if not specified
