marklin 55414, User Manual

Page: 19 / 48

19
Betrieb • Operation • Fonctionnement Exploitatie • Operación • Operazione
( ) Values = factory settings
DCC: programming on the programming track by means of CV programming,
programming with PoM (Program on the Main); this must be supported by the controller you are using.
* The values for the desired setting must be added!
Example: The number of speed levels 28/128 = 2 + DCC operation with a braking route = 4, results in the value = 6
CV Discription 6021 Value DCC Value
63 PoM Volume 01 – 63 (63) 0 – 255 (255)
64 PoM Brake threshold 0 – 255 (105)
75 Address 2 (1st consecutive address) 01 – 80 (45) —
138 PoM Volume for sound "squealing brakes" — 0 – 255 (255)
139 PoM Volume for sound "operating sounds" — 0 – 255 (255)
140 PoM Volume for sound 1 (whistle) — 0 – 255 (255)
141 PoM Volume for sound 2 (Switching whistle) — 0 – 255 (255)
142 PoM Volume for sound 3 (Bell) — 0 – 255 (255)
146 PoM Volume for sound 7 (Water pump) — 0 – 255 (255)
147 PoM Volume for sound 8 (whistle) — 0 – 255 (255)
148 PoM Volume for sound 9 (oil burner) — 0 – 255 (255)
150 PoM Volume for sound 11 (Air pump) — 0 – 255 (255)
151 PoM Volume for sound 12 (Injector) — 0 – 255 (255)
152 PoM Volume for sound 13 (Blowing out cylinders) — 0 – 255 (255)