a u t o m a t i c g r i n d e r s
~ 20 ~
12.- Appendix I: Filter-holder identification.
(Only for QUIMBOA CLASS A model)
As explained in section 5.3.3, the grinder has several filter-holder
identification systems, which can be set by your Service Technicians.
The most useful among them is the Filter-holder Detection system.
Using this patented system the grinder distinguishes between a filter-
holder for two cups of coffee and filter-holders for one cup, without any
action on the part of the operator.
A special tag or identifier (provided with the grinder) must be fixed
to the 2-cup filter-holder: the grinder senses the presence of this device
(and provides the dose for two cups of coffee) and filter-holder without
tag (for which it provides the dose for one cups of coffee), with no need
for any action on the part of the operator.
To install the identifier proceed as follows:
1.- Two magnetic tags are supplied
with each A-class grinder, to be fixed to
the 2 cups filter-holder.
2.- Place the tag as shown in the image below, the side at an angle
facing towards the grinder. (See detailed installation instructions,
supplied with the tags).
