a u t o m a t i c g r i n d e r s
~ 15 ~
8.- Cleaning.
Before proceeding to clean any grinder parts, disconnect
from the power supply by unplugging the electrical cord from
the back of the grinder.
8.1.- Cleaning the bean hopper.
Close the inlet hopper
and loosen the screw that
attaches the hopper to the
grinder (See the illustration)
until the hopper is released.
Remove
the
hopper
from the grinder, empty
any remaining coffee and
clean it with soap and a cloth soaked in water to remove the residual
oils from the coffee beans. Carefully dry and attach the hopper back
onto the grinder, reinserting the screw that holds it in place.
8.1.- Outer cleaning of the grinder.
Clean with a damp cloth. Do not use detergents, abrasive products,
alcohols or solvents. Use a brush to remove the coffee from the
recessed areas.
Do not clean the device by spraying it with water.