a u t o m a t i c g r i n d e r s
~ 9 ~
To connect the grinder to the power supply, do the following:
-
The grinder's electrical connection must be properly protected by
current limiting circuit breakers, a differential switch and a ground
connection, according to current safety regulations.
-
Make sure that the voltage and frequency of your establishment match
those indicated on the grinder's rating plate.
-
Plug the grinder into the electrical socket. The display will show the
message
“
1 c
1 c
1 c
1 c
”
.
-
Open the hopper lid and pour the coffee beans into the hopper. NEVER
put GROUND COFFEE in the hopper.
-
Make sure that the hopper closing device (Pos. 2) is open.
-
Select the desired coffee dose, pressing the corresponding button:
-
Buttons B and C allow you to select one or two cups.
-
The display will show the selected dose
“
1 c
1 c
1 c
1 c
”
or
“
2 c
2 c
2 c
2 c
”
.
-
Insert the filter-holder from your coffee machine in the filter-holder rest
(Pos. 10) as far as it will go.
-
The corresponding dose is deposited in the filter-holder.
-
Compact this dose using the press tamp (Pos. 5) to level off the ground
coffee before placing it in your coffee machine.
-
The grinder automatically grinds the corresponding dose.
-
Use the ON / OFF button (Pos. E) to turn on and off the grinder. In the
Off position, the grinder remains in stand-by mode.