manualshive.com logo in svg

Market Forge Industries A, Parts And Service Manual, Page: 17 / 21

Share
Download
Market Forge Industries A Parts And Service Manual Download Page 17

TO SERVICE SUPPLY VALVE AGAINST LEAKS 

Remove the interference of the pivot arm by detaching 
it at the actuating arm junction and from the pivot stud. 

Remove the pivot stud and proceed as follows: 

1. Remove existing valve cap (6). (It is not neces-

sary to remove the valve.) 

2. Replace valve cap (6) with the seating tool after 

 having retarded the bolt to a point where it will not  

prematurely strike the ball in the valve. 

3. After the seating tool-is well secured, screw down 

the bolt to make contact with the ball assembly and 
apply pressure to force the ball to "make" a new 

seat. 

4. Remove the seating tool and replace it with 

original valve cap(6). (We recommend an 
application of "Rectorseal" to threads to make a 

secure fit.) 

5. Repeat the above process if the first attempt 

does not stop the valve from leaking. 

'(Seating tool may be obtained from the factory.) 

THE STEAM PRESSURE GAUGE ASSEMBLY 

To remove the complete steam pressure gauge 
assembly, it will first be necessary to remove the side 
panel. The steam pressure gauge may then be 
detached by removing item (2) and then removing the 
two nuts which hold the pressure gauge bracket in 
place. The guage is then removed from the front of 
cooker. To reassemble, reverse the above procedure. 
 
 
 
 

 

ITEM 

PART NO. 

DESCRIPTION 

1 

90-8693 

3/16 "0. D. Tubing (Model A-1) 

 

15-7054 

3/16 " 0. D. Tubing (Model A) 

2 

10-4370 

Brass Nut for Compression Fitting 

3 

10-4371 

Brass Sleeve for 3/16 " 
Compression Fitting 

4 

10-4748 

0-30 No. Pressure Gauge 

5 

10-3360 

1/8 "IPS Male x 3/16 O.D. Tube 
Elbow 

 

5110 

 

Summary of Contents for A






















Reviews:

No comments