Markes International Ltd
T:
+44 (0)1443 230935
F:
+44 (0)1443 231531
E:
www.markes.com
3.
Place the 1/16 x 0.4 mm (U-FV001
Swagelok type nut (SERZ-0157) on loosely
4.
Insert fused silica transfer into UNITY
a.
Pull ~ 20 cm of fused silica from the PTFE line casing. Cut off the first few mm of fused silica using an
approved capillary cutting tool.
b.
Make a mark 20 mm from the end of the fused silica using typing white
marker.
FV001) ferrule onto the union then thread the 1/16-
) on loosely
Insert fused silica transfer into UNITY
Pull ~ 20 cm of fused silica from the PTFE line casing. Cut off the first few mm of fused silica using an
Make a mark 20 mm from the end of the fused silica using typing white-out fluid or an alternative
QUI-1056
Page 14
-inch stainless steel
Pull ~ 20 cm of fused silica from the PTFE line casing. Cut off the first few mm of fused silica using an
out fluid or an alternative
