Markem Imaje 9232, User Manual, Page: 156 / 185

the team to trust
Configuration/Transfer
155 A40051-B
Job„number:„the„job„to„be„printed„is„selected„via„the„parallel„interface„(direct„
selection„by„job„number).
Library:„the„job„to„be„printed„is„selected„via„the„parallel„interface„„
(selection„via„the„job„increment„interface).
NOTE: for more details about this option, refer to the section on job selection by
parallel interface in the External Connections section.
– TRIGG active edge „:„defines„whether„or„not„the„TRIGG„signal„is„active„on„the„rising„
edge„or„falling„edge.
„ TRIGG„signal„
rising„
edge
falling„„
edge
– Number of photocells „:„used„to„define„whether„the„object„movement„speed„is„
measured„with„a„single„photocell„or„two„cells.
– Photocell distance „:„enter„the„distance„(from„10„to„9999„mm)„between„the„
photocells„if„the„speed„is„measured„with„two„photocells,„or„the„object„length„if„the„
speed„is„measured„by„just„one„photocell.
–
Encoder step
„:„corresponds„to„the„distance„travelled„between„two„encoder„pulses.„
This„value„depends„on„the„diameter„of„the„wheel„used.
– Non-double printing „:„if„this„option„is„enabled,„a„message„cannot„be„printed„twice„
in„succession„without„being„modified.
– Algo 1, 2, 3 and 4 „:„used„to„enter„four„algorithm„numbers„which„will„be„used„by„
default.„the„selected„default„algorithms„are„more„easily„accessible.