Markem Imaje 9232, User Manual, Page: 108 / 185

the team to trust
Troubleshooting
107 A40051-B
9- „Incorrect„print„speed Incorrect„horizontal„print.„
9a- „Adjust„the„tacho„division.
10- „Backup„time„too„long„for„data„flash 10a- „Restart„the„printer.
10b- „Contact„Markem-Imaje„technical„support.
11- „Duplicate„print„attempt 11a- „Check„that„the„printer„is„receiving„jobs„with„different„
content„with„each„print.
12- „Print„speed„too„low 12a- „Check„the„speed„measurement„settings„and„the„
position„of„the„cell„in„relation„to„the„printhead.
13- „Drop„load„supply„failure 13a- „Clean„and„dry„the„printhead
14- Drop„deviation„supply„failure 14a- „Clean„and„dry„the„printhead
15- „Head„cover„absent„or„not„detected 15a- Replace„the„head„cover„to„restart„printing.
16- „Jet„out„of„gutter„or„not„detected 16a- „Clean„and„dry„the„printhead
16b- „Use„the„“Unblock„Nozzle”„function„in„the„head„
operations„screen„if„the„jet„is„not„in„the„gutter.
17- „Drop„(phase)„detection 17a- „Clean„and„dry„the„printhead
17b- „Use„the„"Adjust„break-off„point"„function„in„the„head„
operations„screen.
18- „Jet„poorly„positioned Printing„may„be„of„poor„quality.„The„printhead„may„be„dirty.
18a- „Clean„and„dry„the„printhead
18b- „Use„the„“Unblock„Nozzle”„function„in„the„head„
operations„screen.
19- „Ink„level„too„high 19a- „Drain„the„printer„according„to„the„procedure„described„
in„this„manual.
20- „Viscosity„too„high 20a- „Check„that„the„ink„used„corresponds„to„the„printer’s„
configuration.
20b- „Contact„Markem-Imaje„technical„support.