C
E
G
E
Attach G in between E. Repeat this step 3x.
1
2
3
4
5
6
7
8
Attach A to each end of E. Next, attach the other end part of E to I.
G
Slot in the screw into the hole and press it downward to secure its
position.
Tighten the screw (C) using Allen key. Repeat STEP 3 & 4 on the
other parts. The torque to tighten the screw between
receiver and leg is 22Nm to 28Nm.
Tighten the pre-instalaled screw (D) to the beam using Allen key.
Install the table top by slot in the screw (F) . Make sure the table
top is flush to the legs.
Finally, secure the table top by using self tapping screw (F).
E
D
A
*press downward
A
E
E
E
G
*flush
*MOX Pro CO4
*MOX Pro CO4 (Meeting Table)
I
F
Installation for MOX Pro single is completed.
Loosen the screw at the bottom of the leg to adjust
the height of the workstation and tighten it back once
reaching to the desired height.
*loosen the screw at the
bottom of the leg
F
B