12
5.13 Switching difference
Adjustable between 0.1 and 3.0 K.
5.14 Change minimum control signal
Note:
When there is no demand for heat, the PinTherm Connect sends out a signal of 0VDC.
5.15 Change maximum control signal
5.16 Change control signal range
This function determines when the 0 – 10VDC signal is modulated back in conditions of heat
demand. When set to 1.0, the PinTherm Connect will start to modulate the 0 - 10V signal at 1K
below the target temperature.
The range can be set between 0.5 – 3.0 and is set to 1.0 as standard.
SWITCHING DIFF.
1.0K
back to
the menu
select
changes the
flashing digit
OK
SWITCHING DIFF.
OK
select
change setting
OK
OK
0-10V min(0-5V)
2.0 V
0-10V min(0-5V)
back to
the menu
select
change setting
OK
OK
0-10V max(5-10V)
10.0 V
0-10V max(5-10V)
back to
the menu
back to
the menu
select
change setting
OK
OK
0-10V Range(1-3)
1.0
0-10V Range(1-3)
Summary of Contents for PinTherm Connect
Page 99: ...99...
