Mark Allstar, Instructions For Use Manual, Page: 9 / 32

1.5 Storage and transport
• Store this product in a dry and clean place protected from mechanical (e.g. sharp
edges) and chemical hazards (e.g. acids, gas) at room temperature and protected
from light (e.g. UV).
• Store and transport this product in the original or an equivalent packaging. Store the
rope loosely in figure of eight loops to avoid knots, which may result in blocking the
device.
1.6 Maintenance
• Repairs may only be effected by MARK Save A Life or an authorized partner.
• If this product has been subjet to a fall, all parts must be inspected and, if necessary,
be replaced by MARK Save A Life.
• This product must not be tumble-dried, dried in the sun or over a heat source
(e.g. radiator) -> Air-dry this product in an airy, shaded place.
• This product (the rope in particular) must not be disinfected or impregnated.
• Do not use chemicals when cleaning the product.
• This product must be inspected by MARK Save A Life or an authorized partner at
least once a year but in any case after maximum descent distance written on page 23.
Enter the distance in the use protocol.
1.7 Accidents and rescue plan
• A suspension trauma can be triggered by falling into the rope, a long descent or if a
person is helplessly suspended in the harness for a long time.
• Prepare a rescue plan indicating all possible rescue measures in case of emergency
before using this product.
• Check the use and fall area and make sure to secure, mitigate or remove possible
dangers before using this product.
7