Mark Allstar, Instructions For Use Manual, Page: 13 / 32

2.6 Redundancy
A training is not an emergency! At every training situations as well as rope access a
redundant saftey system has to be installed.
Unforeseen events, technical or human
failure cannot be ruled out. For redundancy safety measures you can also use a second
MARK Allstar.
2.7 Rescue deployment
After each rescue deployment the device has to be inspected by MARK Save A Life
or an authorized partner in order to ensure safe use. We recommend using different
devices for training and rescue deployments.
2.8 Overload
Devices that have been subjected to a fall or a heavy load must be retired.
Rope clamp: When you activate the rope clamp, the hand wheel can only be turned in
one direction. Turn the hand wheel gently to figure out the direction in which you can
turn the wheel.
Danger: If you turn the hand wheel in the wrong (blocked) direction, the wheel or the
device can be damaged. In that case, the device has to be inspected by MARK Save A
Life or by an authorized partner.
2.9 Temperature
This product can be used in environments between – 40° C and + 65°C .
11
WARNING