4
Powder Check Instruction Manual Version 1.1
4.
Verify there is a battery in the housing, then begin to thread the die down slowly until the
buzzer starts going off, then go one last quarter turn and move the tool head to the top. Tighten
the thin hex nut on the die.
5.
Choose your
Powder Probe Tip
for your caliber size. See below for the rod sizes for your caliber.
Figure 2: Powder Probe Tips.
6.
Slide the Trigger onto the Upper Rod and drop them into the top of the die assembly, then take
the probe tip you chose and feed it up through the bottom of the die assembly. Thread the rods
together tightly. Note: You may apply purple Loctite to the rod threads to prevent loosening.
Figure 3: Assembling the Trigger and Rods onto the mounted product.
Small
Pistol
Large
Pistol
Small
Rifle
Large
Rifle
Optional:
Apply purple Loctite
to thread to prevent loosening
