5
S A FET Y
General Safety Instructions
•
B efore operating the MPC-ML2R , read this User Manual thoroughly
•
Keep this User Manual for future use
•
Verify computer system capability (see System Set-up) to insure operation of Display
•
For expeditious installation, follow User Manual instructions in sequence
•
A dhere to all Caution and Warnings on system and as stated in this manual
•
Instructions for installation and operation should be followed precisely
•
Adjust only those controls covered by manual’s operating instructions; improper adjust-
ment of other controls voids Display’s warranty and may result in damage, and
•
Adhere to local installation codes.
General Display Safety
•
A lways disconnect Display from power source before cleaning
•
Do not operate Display with a damaged cable, and
•
Do not operate if Display has been dropped or damaged. Display should be inspected
ervice Personnel
General Safety Precautions
•
Power cable must be connected to a properly wired and grounded DC power source
•
Any equipment to which Display is attached must also be connected to properly wired
and grounded power source
•
Do not connect or disconnect Display during an electrical storm
•
Do not disassemble Display enclosure – there are no User serviceable parts within
•
Do not disassemble or modify Display to avoid possibility of electrical shock, damage
to electrical components or scratching Display surface, and
•
Disassembly of Display voids warranty.
WARNING!
Fluids from LCD Display
•
LCD Display
•
I
alcohol on a clean towel; wash with water; immediately consult with a doctor, and
•
-
mediately consult with a doctor.
CAUTION!
Safety Icons
WARNING!
CAUTION!
Warning! Shock Hazards
t his icon is intended to warn User of a potential risk of electrical shock.
Caution! Instructional
t his icon is intended to caution User of important operating and/or
maintenance instructions.
I
I
MPC-ML2R-UM 4/2014
