13
Brightness Button
T he toggle button is second; it controls the
brightness of Display.
•
Large Sun : when repeatedly pressed or
held down will cause Display’s backlight
brightness to step up in increments to its
brightest setting
•
S mall Sun: when repeatedly pressed or
held down will cause Display’s backlight
brightness to step down in increments to
its lowest setting,
•
L owest Setting is almost total black, suit -
able in very subdued light, as in night time
operations, and
•
Adjusted settings are maintained during
power cycles (ON/OFF).
OPERATOR CONTROLS
Select Button
T he SELECT
Button is used to start the OSD Menu. T his button is also used to select
a function within the menu. (See On-Screen Display section.)
Up Arrow Button
T he UP A rrow Button is an adjustment tool in the OSD Menu. (See OSD Menu Catego -
ries section.)
Down Arrow Button
T he DOWN A rrow Button is an adjustment tool in the OSD Menu. (See OSD Menu
Categories section.)
Day/Night Button
i
NVIS, this button switches between Day and Night modes.
Without NVIS, this button switches between min (Day) to max ( Night) brightness.
Adjust brightness of Display to lowest possible setting for a
given set of conditions and display characteristics. Doing so will:
•
Provide best viewing of image
•
Extend lamp life of backlight
•
Reduce internal heat of Display, and
•
Consume less power.
On right hand side of the Display bezel are
six (6) Operator Control buttons (Figure 9).
Figure 9
Day/Night
Up
Down
Power On/
(I/O)
Brightness Control Toggle
(Large Sun, Small Sun)
Select
Power Button
•
Power ON
vertical slash and circle
•
Press and release to turn Display’s back -
light ON or OFF, and
•
b lue LE Ds glow behind buttons when Dis-
play is powered on.
MPC-ML2R-UM 4/2014
