11
Charge Pro™ Portable Chargers Instructions
D) Charger is at 25% but a full battery is connected – Leave the charger
connected for 30 minutes before the charger status correctly shows the
battery status.
E) Charger does not charge after mode has been changed. – Wait for 5 seconds
before charging will start.
WARRANTY Statement
LIMITED WARRANTY
For two (2) years from the date of purchase, Marinco will, at its discretion, repair
or replace for the original consumer, free of charge, any part or parts found upon
examination by Marinco to be defective in material or workmanship or both. All
transportation charges under this warranty must be borne by the consumer.
Proof of purchase is required. Proof of purchase must be a computerized receipt.
Handwritten receipts are not accepted.
Warranty Claim
Thank you for contacting Marinco regarding the product concerns as related to
Form, Fit and Function.
Marinco offers an online warranty (RMA) request form on our website. www.
marinco.com in the resources tab. Please fill in the online form titled Marinco
Warranty Request.
For more information and installation guides, visit our website: www.marinco.com
27101
27104
Input voltage:
115 V 60 Hz AC
Charge end voltage:
7.1 V +/- 0.20 V (6V mode)
14.25 V +/- 0.2 V (12V mode)
Charging current:
1.1 amp
4.3 amp
Rechargeable battery type:
Any 6V or 12 V lead acid batteries
(Flooded, AGM, GEL)
Battery Maintenance
Capacity:
1.2 – 40 Ah
14 – 120 Ah
Battery Charge capacity:
1.2 – 25 Ah
14 – 90 Ah
Protection type:
IP65 (casing)
Weight
1.1 pounds (0.5 Kg)
3.5 pounds (1.6 Kg)
Specifications
