4
Remote Control Bracket Installation (Optional)
1. Take off mounting plate from the back of bracket. Secure mounting plate on selected location with
the two (2) self-tapping screws that come with the product.
2. Fit bracket to mounting plate as shown in below.
！
Provide water and weather protection for the location where remote control bracket is installed.
Mounted Remote Control Installation (For 23250-R / 23350-R)
1. The mounted remote control should be installed on flat surface at a dry location.
2. Make wiring access of size 5/8 inch or 16 mm.
3. Route the power cable through wiring access.
4. Secure mounted remote control by two (2) M4 self-tapping screws. Put back the front caps.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from