2
Product Highlights
Certified in compliance with IEC 60598-2-5:1998 (safety), EN 55015 + EN 61547 (CE), EN
301 489-1/-3 + EN 300 440-2 (RF), FCC Part 15B/15C (FCC), EN 60945 (marine), IP67.
350° two speed horizontal rotation, 60° vertical range.
Digital remote control signal reliable and resistant to interference.
316 Stainless steel body.
Completely waterproof – IP67.
12 Volts DC input power. (24Volts DC input power for 23150A / 23151A)
Specifications
Material
Stainless steel 316
Styling
Classic
Light Source
High Power LED over-heating protection
Light Coverage
0.25 Lux @ 600m
Light Mode
Spot light
Rotation
350° horizontal (dual speed), 60° vertical, jam protection
Power Cable
3ft
Power Supply
12 VDC (24VDC for 24V version)
Size L x W x H
212 x 120 x 252 (mm)
Weight
11.37 lbs
Current Draw
3 Amp @12V (1.5Amp for 24V version)
Installation
Spot Light Installation
1. The spot light should be installed on flat, level, and non-metal surface.
2. Make use of the foam gasket to mark mounting holes and wiring access (1 inch or 25.4 mm) on flat
surface, see picture below. Make wiring access.
3. Route the power cable and signal lines through wiring access of the gasket and flat surface.
4. Secure deck mount by four (4) self-tapping screws of 1/4 inch (6 mm), or bolts and nuts.
！
Remember to install the foam gasket, and ensure proper sealing.
Downloaded from
Downloaded from
Downloaded from