MARIMEX Orlando Premium, Assembly Instructions Manual

Page: 43 / 69

85 84
Orlando Premium Pool
Assembly instructions
Part 1 – introduction
Before you begin, read all the sections of the manual before you finish. Instructions
explain how to install your pool. Simply follow the step-by-step instructions.
WARNING: The use of the swimming pool also includes the observance of the
safety rules described in the assembly and use instructions. In order to prevent
drowning or other serious injuries, it is worthwhile to prevent unexpected access to
the pool for children up to 5 years of age and to keep them constantly supervised
during their bathing.
NOTE: The illustrations in this manual may not exactly match your pool. The illustra-
tion serves primarily to better understand the text. The manufacturer reserves the
right to make changes without prior notice.
IMPORTANT: When constructing a swimming pool, it is necessary to respect the
differences between the oval and circular swimming pools. Where there are signifi-
cant differences, the text indicates whether this is a guideline for an oval or circular
pool.
Approximate dimensions and volume of water in the pool - Fig. Pool sealing class:
W2.
Read the needle equipment
Before starting the pool construction, prepare the necessary tools and tools. You
will need:
spade, spade, rake, shovel and wheel for soil displacement and sand handling;
a wooden prism of about 5 x 10 cm with a length greater than half the diameter of
the pool, wooden pins, 2.5 x 2.5 cm wooden stakes with a flat top end and a length
of about 15 cm, a bag of flour or fine sand etc., a twine, knife, spirit level, band,
hammer and nails for measuring and preparing a flat base;
paving blocks to strengthen the substrate under the pool structure;
sifted sand for grounding and creating fillet filler;
cross and flat screwdriver, combination pliers, textile adhesive tape (on carpets) of
a width of preferably 50 mm, knife, clothes pegs for pool construction.
NOTE: For wooden posts, we recommend drilling a sufficiently large and deep hole
beforehand. Wooden pins can be replaced, for example, by large nails.
Before installing the pool we recommend to build steps. They will be useful during
the installation of the swimming pool, when it is necessary to enter and exit the
pool over the assembled wall. Instructions on how to build the stairs can be found
in their packaging.
Choose you for a building a good day
With the swimming pool, wait for a sunny, windless day. Do not attempt to build
a pool behind the wind. Make sure you help at least one adult. Approximate insta-
llation time, excluding offshore landscaping, is about 2 hours for circular pools, for
oval pools about 4 hours.
Spare parts and service
In case you need advice, service or spare parts, contact your dealer. Use original
spare parts for maintenance and repairs.
Warranty conditions
The warranty terms are available on the Marimex CZ, s.r.o. www.marimex.cz
Part 2 – preparation of the station
SELECTION OF THE STATION FOR BUILDING
TERRAIN
To select the right place for your pool, take special care:
Select an area of the appropriate dimensions and make it as flat and horizontal as
possible.
Choose a sun-dried place with dry and solid soil all day long - do not place a pool
on asphalt, gravel, wood, picking, watering, peat mud or overground, such as water
tanks, septic tanks, canals,
Check to see if there is a plant that grows through the pool of your pool. If this is
the case, it is advisable to sharpen the habitat with the total herbicide (as per the
instructions) in good time before starting the fieldwork, or place a black garden foil
under the body of the pool.
The sloped areas will need to be adjusted to be horizontal, by digging higher places,
not by pouring down the lower places.
Plan the location of the swimming pool so that there is minimal space around the
pool for handling during installation and for future use of the swimming pool (at
least 1 m).
The swimming pool is designed to be partially embedded into the ground once the
conditions for fitting have been met.
Conditions of incorporation:
The swimming pool must be on the terrain, not on the boat.
It is necessary to verify the level of ground water at the site and whether it does
not fluctuate depending on the season. It is also important to classify the subsoil of
the swimming pool, its absorption (especially for clays). The effect on groundwater
status will also be the way of water withdrawal from surrounding plots depending
on the soil during the spring melting season or during torrential rains. In case of
unfavorable hydrogeological conditions, take appropriate measures to drain the
plot, ie. basin drainage from the bottom of the pool or build a sump alongside the
pool where a submersible pump with a level switch will be fitted and the water will
be drained into the rainfall or sewer.
In particular, it is advisable to address access restrictions in the pool area. The
recessed pool is easily accessible for children or animals. In the interest of safety,
it is necessary to secure the surroundings of the pool before children and animals
enter the pool.
EN