In a Project Studio
Z
This article bases on
section “Mixer” and
“Output Control”, as
well as “Sounding Good”
from the “Hands on”-
part.
Z
Read section
“Sounding good”.
Situation
Let’s imagine the following: Producing your
brand-new chart hit you reach a critical phase:
you want to record the vocals. For a singer to
provide a perfect performance it is important,
that the surrounding conditions are as well: most
advantageous. The first step towards this, is a
latency-free headphone mix in best possible
quality. For that you use your studio reverb. For
its latency-free integration – the TRACE PRO
AE.
How to do it?
Hardware routing
Plug the microphone cable into the analog input.
Within the TRACE PRO AE Mixer, bring the
signal up to perfect level using the “GAIN”-
knob. Into the analog output, plug the headphone
pre-amp for your musician. Now take care of the
effect unit: the digital output of the TRACE
PRO AE is plugged to the input of the effect
unit. Its output goes to the digital input of the
TRACE PRO AE.
Software routing
In the Output Control of the TRACE PRO AE
assign under “SOURCE” “AUX 1-2” to “Analog
OUT”. On “Digital OUT” under “SOURCE”
push “AUX 3-4”.
48
