27
Showing a slide
Tap on any slide title to show it.
First Show Page
First Show Page is the page that is displayed initially when the Presenter-to-Go Application is launched.
If the card is still powered since the last slide show, then it is the last shown slide. This allows users to
go to another application (i.e. Date Book, Address), and return to the presentation. Otherwise it is the
first slide of the last presentation selected. If that presentation is unavailable, then it shows the
Presenter-to-Go splash Screen.
Displaying Notes while making Presentations
To view corresponding slide-notes and slide text content while making the presentation, view the note of
the first slide and start the presentation. Then as you change the slide in a presentation, the
corresponding slide-note and text content will be enabled.
Remote Control Operation
Included with Presenter-to-Go is a 14 button IR remote control shown below.
Fig 9.21 Remote Control
The following control choices are available:
REV
Reverse or back one slide.
FWD
Forward or advance one slide.
AUTO
Set the presentation in AUTO slide-show mode. If in Preferences the presentation is set
to enable LOOP, then the presentation will run continuously.
RETURN
Return to last slide.
The slide number can be entered into the keypad directly. This in combination with the Return feature
will allow the user to toggle between two slides anywhere in the presentation.
Note: The IR port on
the Visor is on the side
of the unit. It is
important to point that
side of the unit towards
the area where the
person with the remote
control is located.
