Marey 26HW70 A, Instructional Manual, Page: 4 / 33

- This manual has been prepared for the installation and use of the equipment.
- Please keep it in a safe place for future reference.
The installation must be done in accordance with the information supplied in this manual.
All other relevant national, state and local regulations must also be adhered to including (but
are not limited to):
- National Fuel Gas Code:
American Standard ANSI Z223.1/NFPA 54.
Canadian Standard CSA B149.
- The Manufactured Home Construction and Safety Standard:
American Standard, Title 24 CFR,Part 3280.
Canadian Standard CSA 2240 MH.
- National Electrical Code:
American Standard ANSI/NFPA 70.
Canadian Standard CSA C22.
- American National Standard / Canadian Standards Association Standard for Gas Water Heaters:
ANSI Z21.10.3·CSA.
- Local, Water, Gas, Electrical and Plumbing Authority Regulations.
- Municipal Building Codes including local OH&S requirements.
1.1 INSTALLATION NOTES
Maintenance and trouble-shooting must be done in accordance with these instructions and
the applicable regulations listed above.
1.2 SERVICE NOTES
It is recommended to flush and maintain the gas water heater for ≥1 times a year. Please contact
your local dealer for maintenance. Do not disassemble the gas water heater without permission.
SERVICE SHALL BE CARRIED OUT ONLY BY AUTHORIZED PERSONNEL
AND THE APPLIANCE SHALL NOT BE MODIFIED
(for example, a licensed plumber or gas technician).
1.3 GAS WATER HEATER MAINTENANCE
1. IMPORTANT NOTES
WARNING
04