Marey 26HW70 A Instructional Manual Download Page 2 | Manualshive

Page: 2 / 33

Marey 26HW70 A Instructional Manual Download Page 2

Congratulations! You've just purchased a new Marey Gas Powered tankless water heater
and will soon begin to enjoy the benefits of "going tankless."

The availability of instant hot water, combined with the unit's outstanding energy efficiency
and space saving design, will quickly prove you that you've made the best decision for meet-
ing your home's hot water needs.

Take the time to thoroughly read and understand this safety and installation manual in its
entirety before you attempt to install your new gas Powered tankless water heater, as it
contains important safety tips and instructions.

Please carefully read all instructions and warnings. Should you have any questions, please
visit www.marey.com for installation videos and FAQ. Please keep this manual for future
reference.

WARNING: This unit should be installed by a certified professional in accordance with all
local building and plumbing codes Under no circumstances should you attempt to install,
repair, or disassemble the Marey Gas Powered water heater without first shutting off any gas
supplied to the unit.

«
1
2
3
4
...
»

Summary of Contents for 26HW70 A


































Reviews:

No comments