To set up your PanCam follow the
instructions below.
1) Download the MarCum PanCam App for your iOS or Android device.
2) Connect the Camera via the camera connection or via the video in jack and press
the power button to turn the machine on (make sure the internal battery is charged
with the supplied charger.)
3) Set the phone / device network to Wi-Fi and choose the
“Marcum” wifi connection.
4) When prompted for the password the first time enter
“12345678” then click join.
5) Once connected we recommend changing the WIFI name and Password. To do
this enter the APP then click
“Edit”. Change the user name and password to what
you prefer then click save.
6) Now click
“Enter” on the app main screen to connect to the PanCam. You can now
view on your phone / device what the camera is seeing along with rotate, take still
images, record video or adjust your camera lights.
7) If you forget the username / password you can reset the PanCam using the
magnets located in the soft case handle. To do this place the magnet on the top
side of the letter
“M” in MarCum for about 10 seconds. This will reset the WIFI
name and Password. To connect to the PanCam look in your WIFI settings and
click on the
“MarCum” wifi connection. Again, make sure you change the
Username and Password by clicking The Edit button in the MarCum APP.
Reset magnets located in the soft case
handle can be placed here to res
e
t password
8) Your PanCam is also equipped with a Video In plug (video cable not included). This
will allow you to plug in video systems and wirelessly transmit the signal to your
phone / device.
