12
VII. Maintenance and customer service
1. Regular cleaning, maintenance, and lubrication
always unplug the power cord after you have finished working with the drill.
Make sure that the ventilation slots are always clean and clear. You can use a soft brush to clean.
If necessary, wipe the drill down with a lightly damp cloth. Do not use any caustic or abrasive
chemicals.
No water, oil, or other soiling should be allowed to get into the tool.
The chuck should be checked for damage from time to time.
Unused tools should be kept out of the reach of children. Protect the tool from dampness and
excessive heat.
2. Customer service provided by the manufacturer and representatives.
If the tool's power supply cord gets damaged, it must be replaced with a special cable that is
available from the manufacturer or customer service representatives.
Repair and maintenance work may only be performed by authorized specialists.
Accessories
operating instructions
Side handle
Depth gauge
Chuck key
VIII. Warranty policy
Irrespective of statutory warranty claims, the manufacturer grants a warranty in line with the
legislation applicable in your country for a period of no less than 1 year (in Germany 2 years).
The warranty period starts with the date on which the tool was sold to the end user.
The warranty is limited exclusively to deficiencies caused by material or manufacturing defects.
Warranty repairs may only be performed by an authorized customer service representative.
To assert a warranty claim, the original receipt (with date of purchase) must be included.
The warranty does not cover any of the following cases:
• Normal wear
• Improper use, such as overloading the tool or using non-approved accessories
• Damage caused by outside influences, use of force, or foreign bodies
• Damage caused by failure to observe the operating instructions, e.g. connecting the tool to the
wrong mains voltage or failure to observe the assembly instructions
• Fully or partially disassembled tools
955.1920.246 DDM1 Drilling Machine Manual Multi Language_Layout 1 06/12/2012 10:26 Page 12
