8
anyone who is unfamiliar with its operation and operating instructions. Power tools are dangerous if
they are operated by inexperienced users.
e) Treat power tools with care. Check to make sure that moving parts are working properly and do
not jam; also check to see if any parts are broken or damaged in such a way as could impair the
correct functioning of the power tool. Make sure damaged parts are repaired before operating the
machine. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges jam
less and are easier to control.
g) Use the power tool, accessories, bits, etc. in accordance with these instructions. also take the
working conditions and the work to be conducted into account. Using power tools for applications
other than those intended can result in hazardous situations.
5) Service
a) Your power tool should only be repaired by specialist personnel using original spare parts. Doing
this will ensure the tool retains its safety.
III. Special safety precautions:
Safety precautions for hammer drills
• Wear ear protectors when using hammer drills.
Exposure to noise can cause hearing loss.
• Use the side handles supplied with the power tool.
Losing control of the power tool can
result in injury.
• Hold the power tool by the insulated handle areas when performing work during
which the insert tool might hit hidden power lines or its own supply cord
. Contact a
live wire can energize the metal parts of the power tool and result in an electric shock.
• Only use the speed selector switch when the motor is at a standstill.
attempting to
change the speed while the drill is running can damage the gearbox
• Never use the hammer drill as a screwdriver.
Tightening and slackening screws, nuts, etc.
with the hammer drill is prohibited.
• Do not leave the chuck key in the chuck.
Before switching on, check that the key is no
longer in the chuck.
• Ensure that the power tool and any person working with it do not come into contact
with water
The tool's supply cord must be disconnected from the socket prior to any adjustments, servicing, or
maintenance. The electrical power rating of your extension cable must at least equal the power
required by the tool.
Check that the mains voltage matches the specifications on the drill's rating plate.
Check the walls and ceilings to prevent damage to any hidden cables.
Never touch the drill's outer housing directly
after drilling. It gets very hot during drilling.
only use the supplied key housing for
955.1920.246 DDM1 Drilling Machine Manual Multi Language_Layout 1 06/12/2012 10:26 Page 8
