Marco MRCVH095ZD-TE, Installation Instructions And Recommendations For Using And Maintaining

Page: 9 / 20

EN
7
Selected
power
Automatic Cook Start
Function (Time in seconds)
1 50
2 90
3 150
4 220
5 320
6 540
7 150
8 240
9 ---
SWITCHING THE AUTOMATIC
COOK START FUNCTION ON
1 Set a hot plate to power 9 and
then press the touch button . The
power display will flash 9 and A
alternately. Lower the touch button
to the desired cooking power (for
example 6). The display will flash
6 and A alternately.
Example:
You want to cook at power level 6 and
program a quick heat at the beginning.
Choose power level 9. Press the touch
button again (3) and the power
display will flash 9 and A alternately.
Then press the touch button (4) to
lower it to power level 6. The system
keeps the hot plate at power level 9
(maximum) for 540 seconds, flashing
6 and A alternately, and then (after
540 seconds) it automatically lowers
to continuous cooking level 6.
CHANGING THE POWER LEVEL
DURING AUTOMATIC COOK START
1 Use the touch button (3) to
change the power level.
When the power is increased using the
touch button (3) the time that has
passed until then is taken into account
Example:
You have chosen power level 1 (50
seconds automatic cook start) and
after 20 seconds you change it to
4 (220 seconds). The automatic
cook start will be 200 seconds (220
minus 20).
DISCONNECTING THE AUTOMATIC
COOK START FUNCTION
After at least 10 seconds have passed
since the automatic cook start function
was activated:
1 Press the touch button (4). The
automatic cook start function will be
deactivated.
Stopwatch function
This function allows you to set a time,
after which a warning sound is heard.
To activate the function:
1 With the touch control on and the
timer not set for any hot plate,
simultaneously press the clock
touch buttons or (6/7).
2 The clock display switches on (9),
displaying 00, and the pilot light (8)
will flash.
3 Press the touch buttons or
(6/7) again until you set the
desired time. After a few seconds
the decimal point will start to flash,
showing that the countdown has
begun.
Once the countdown is complete,
you will hear a series of beeps, which
you can stop by pressing any of the
touch buttons.
If at any time during the countdown
function all of the hot plates are at
power level 0, the touch control will
switch off after a few seconds, but
the stopwatch will continue to the end
of the countdown or until you stop it.
To stop the stopwatch, just set the
remaining time to 00. Firstly, to select
it, simultaneously press the touch
buttons and (6/7).
Timer function
This function makes the cooking
process easier because you do not
have to be present: the timed hot
plate(s) will switch off automatically
after the set time has lapsed. There
is a separate timer for each hot plate,
which allows all of the hot plates to be
timed simultaneously.
The function is controlled using the
increase/decrease time touch buttons
and (6/7).
Timing ONE hot plate.
To activate the timer for one hot plate:
1 Connect the appliance and activate
one or several hot plates at a set
power level.
2 Simultaneously press the clock
touch buttons or (6/7).
3 The display comes on (9),
displaying 00. The clock pilot light
(8) will flash.
4 Press both touch buttons
successively until the pilot light for
the hot plate that you want to time
switches on.
5 Use the clock or touch buttons
(6/7) to select a cooking time
between 1 and 99 minutes. The
increase touch button (6) starts
at 1, and the decrease button (5)
at 30.
The timer will be set for the hot plate.
Once the countdown is complete, the
timed hot plate will switch off and you
will hear a series of beeps, which you
can stop by pressing any of the touch
buttons.
Setting the timer for more than one
hot plate.
Repeat the steps above.
Changing the programmed time.
You can change the time afterwards.
1 Simultaneously press the clock
touch buttons or (6/7).
2 Press both touch buttons
successively until the pilot light for
the hot plate that you want to time
switches on (8).
Now you can read and change the
value. If you want to cancel the timer
early, use the touch button (7) to
set it to 00.