Marco MRCVH095ZD-TE, Installation Instructions And Recommendations For Using And Maintaining

Page: 11 / 20

EN
9
The symbol on the product or
packaging means that this product
cannot be treated like usual
household waste. This product
must be taken to a recycling
collection point for electrical and
electronic appliances. By ensuring
that this product is disposed of
correctly, you will avoid harming
the environment and public health,
which could happen if this product
is not handled properly. For more
detailed information about recycling
this product, please contact your
local authority, household waste
service or the store where you
purchased the product.
The packaging materials used are
environmentally-friendly and can
be recycled completely. Plastic
components are marked >PE<, LD<,
>EPS<, etc. Dispose of packaging
materials, like household waste, in
your local container.
Malfunctioning
Before you contact the Technical
Service, please perform the following
checks.
The appliance does not work:
Ensure that the power cable is plugged
in.
The pot sticks to the glass:
If there is molten material between
the pot and the glass, set the hot
plate to maximum power and try to
separate them.
Message U400 and acoustic
warning:
Power surge. Contact your electricity
company.
C o n t i n u o u s b e e p , c o n t r o l
d i s c o n n e c t e d a n d
s y m b o l
o n d i s p l a y :
There is an object or liquid on the
touch control. Remove any object or
liquid on the touch control.
A hot plate disconnects and
message E2 appears on the display:
If during cooking the temperature in
the control electronics is excessive,
the hot plates near the control
might disconnect to avoid damages.
Excessive temperature problems
during cooking only occur in extreme
cases (cooking at maximum power for
a long time). In any case, leave the hot
plate to cool down for a few minutes.
If the problem persists, check that the
appliance was installed in accordance
with these manual instructions.