Service Manual 1000615 Filtro Jug MF 1000616 Filtro Flask MF 02-05-2006
Page 4 of 9
•
Pour a jug (1.8l/2.2l) of water into the tank (cold water reservoir).
•
Plug the machine into the power supply and switch on the power button. The switch
indicator and ‘Brewing’ light will illuminate and the buzzer will sound for 1sec. The
boiler will heat up and water will start to flow through the machine.
•
At the end of the process the ‘Brew Ready’ light will illuminate and the buzzer will
sound. Only half of the water will have transferred to the jug/flask and the remainder
will stay in the machine.
•
The machine is now ready for use.
•
If the machine is ever fully drained this process must be repeated.
BREWING COFFEE
•
Use fine grain coffee which has been ground for use with filter brewers.
•
Keep the jugs/flasks and basket filter clean
•
Put the correct amount of ground coffee into the filter paper. Your coffee supply
company may have pack sizes to suit the brews of your new brewer; if not, as an
approximate guide for your first brews:
Glass Jug
Flask
Water Volume
1.8L
2.2L
Coffee
65-90 grams
75-110 grams
•
Level off the surface of coffee by gently shaking the filter bowl. Slide the coffee filter
bowl into the guide rails and push fully home.
•
Pour a jug/flask (1.8l/2.2l) of water into the tank (cold water reservoir).
•
Plug the machine into the power supply and switch on the power button. The switch
indicator and ‘Brewing’ light will illuminate and the buzzer will sound for 1sec. The
boiler will heat up and water will start to flow through the machine.
•
At the end of the process the ‘Brew Ready’ light will illuminate and the sounder will
sound. (2 short pulses).
•
The coffee is now ready to serve.
The upper hot plate is independent of the brewing process and can be turned on or off when
required
SPOIL INDICATOR
The ‘Brew Ready’ light will automatically turn off after 20 minutes from the completion of a
brew and this can be used as a spoil indicator to signal if the prepared coffee has passed it’s
usable duration.
MAINTENANCE
This machine has been designed to give many years of trouble free service.
It is designed, manufactured and tested to ISO9001:2000 standard.
The only regular maintenance required is occasional de-scaling.
In common with all coffee brewer manufacturers, service calls resulting from lime scale are
not covered by warranty. Fitting a scale reducer is recommended, especially in hard water