Service Manual 1000615 Filtro Jug MF 1000616 Filtro Flask MF 02-05-2006
Page 2 of 9
INTRODUCTION
The information provided in this manual is intended to assist in the installation and
maintenance and service of the Manual-Fill versions of the Filtro Filter coffee Brewer. Please
read the instructions carefully to prevent accidents and ensure an efficient installation.
This manual is not a substitute for any safety instructions or technical data affixed to the
machine or its packaging. All information in this manual is current at the time of publication
and is subject to change without notice.
Only technicians or authorised service providers should carry out maintenance of these
machines.
The company accepts no responsibility for any damage or injury caused by incorrect or
unreasonable installation and operation.
SAFETY INSTRUCTIONS
•
Read and keep these instructions.
•
To protect against electric shock do not immerse mains cord in water or other liquid.
•
To prevent chafing of the cable, do not let the mains cord hang over the edge of a
table or counter; or touch hot surfaces.
•
Do not operate any product with a damaged cord, plugs, or after the machine
malfunctions or has been damaged in any manner. If the supply cord is damaged, it
must be replaced by the manufacturer or approved service agent in order to avoid a
hazard.
•
Switch off at the mains (unplug or disconnect from outlet). Allow to cool before
removing components.
•
The use of non-approved spares and/or accessories may cause damage and/or
injuries.
•
Do not use outdoors.
•
Do not use the product for anything other than its intended use.
•
Keep the outside of the coffee maker clean and dry at all times.