Service Manual 1000615 Filtro Jug MF 1000616 Filtro Flask MF 02-05-2006
Page 3 of 9
TECHNICAL DETAILS
Model
Manual-Fill Jug
1000615
Manual-Fill Flask
1000616
Supply voltage
230V
230V
Frequency
50Hz
50Hz
Power
2300W
2100W
Dimensions
220x385x460
[WxDxH] mm
220x385x615
[WxDxH] mm
Empty Weight
6.1kg
7.1kg
Capacity (per hr)
18L
18L
Brew time
5 min
6.5 min
Brew capacity max
1.8L
2.2L
INSTALLATION
ELECTRICAL
•
Electrical specification: 230Vac. 50Hz.
•
This machine must be connected to a fused 13A single-phase power supply.
•
This machine is provided with a 3-pin plug and must be connected to an earthed
supply.
LOCATION
•
Position the brewer at buffet height on a firm level base that can bear the weight of
the machine when it is filled.
•
Position the brewer level and in such a way that it cannot cause any damage if it
leaks.
•
Position the brewer within 1.5 metres from a suitable power socket.
OPERATION
!
!!
!
Allow time for all the coffee to drain from the filter bowl before
removing.
!
!!
!
Protect the controls against grease and dirt.
!
!!
!
Never use warm or hot water to fill the machine.
!
!!
!
Risk of scalding. Beware of removing the filter basket/jug/flask when
the brewer is in operation. ALL users of this machine should be trained
and should be aware that the machine dispenses very hot beverages.
!
!!
!
Do not place an empty glass jug on a hotplate when it is switched on
except immediately before brewing.
PRIMING
The coffee machine needs to be primed with water prior to being turned on and its first
operation; an amount of water will always remain in the machine.
•
Insert an empty filter basket into the machine and place an empty jug/flask on the
lower hotplate (or base in the case of the flask version)