Marco Beverage Systems MIX PB3-1000870, Service Manual, Page: 27 / 59

Service Manual - Mix Range Nov 2016.docx Page 27 of 59
8.3 Draining the tank:
1. Turn off machine and disconnect from mains power.
2. Allow to cool sufficiently to avoid burn risk.
3. Place machine so that the rear of the machine is located next to a sink or a bucket large enough
to hold the full contents of the tank.
4. Unclip drain hose plug from rear panel by rotating anti-clockwise 90
o
.
5. Gently pull silicone hose from the inside of the machine.
6. Remove drain plug from the end of the silicone hose and empty into sink or bucket.
7. Replace drain plug fully into silicone hose and push silicone hose gently back into the machine.
8. Re-clip the drain plug to the rear plastic enclosure panel by rotating 90
o
clockwise.