Marco Beverage Systems MIX PB3-1000870, Service Manual, Page: 21 / 59

Service Manual - Mix Range Nov 2016.docx Page 21 of 59
7. MENU NAVIGATION
There are 3 ‘levels’ to the Mix Boiler settings.
Level 1 – User Settings Level 2 – Advanced Settings Level 3 – Engineering Settings
7.1 User Settings
The screens displayed to the User depend on which machine type the software has been set to.
Multi-temp PB and UC versions ONLY:
The Top row sets the desired dispense temperature of the corresponding button on the Boiler (or
the Mix dispense font in the case of a UC3).
The second row sets the desired dispense volume – a volume of ‘000’ sets the dispense button to
‘Push & Hold’ mode.
Single temp PB and UC versions ONLY:
( NOTE : in single temp mode ONLY the middle dispense button is enabled – the buttons to either
side as dis-abled.)
Tap versions ONLY:
Enter by pressing all 3
buttons simultaneously
for > 3 <6 seconds
Enter by pressing all 3
buttons simultaneously
Enter by pressing all 3
buttons simultaneously
for > 6 seconds