Chapter 7: Magnum Router GUI Manager
___________________________________________________________________
7-27
Send Configuration
Select this button to send the current configuration in the Magnum Router Manager to the
connected Magnum Router.
This can also be accessed by pressing ALT-D, and is also available as
Send Configuration
from the
Configuration
menu.
The next item to accomplish is to transfer the saved configuration file to the Magnum Router.
As mentioned earlier, no part of the input configuration is sent to a Magnum Router while being
configured. Thus, this step is critical to make the customized configuration operational.
The first item that
Send Config
does is a cursory check of the configuration to be sent. If there
are any errors or warnings found, this screen would appear:
The
Send Config
button will ONLY be available if the Magnum Router Manager is
logged onto a Magnum Router.
Save Configuration Notes
As of version 2.x of the Magnum Router Manager, configuration files are saved with a
“.cf2” extension, where previous versions of the Magnum Router Manager saved files
with a “.cfg” extension. It is possible to save any configuration as either a version 1
(.cfg) or version 2 (.cf2) format – it is strictly up to the user. It is important to note that if
a configuration is saved as a version 1 format, options such as notes, DHCP and RIP
Routing will not be written to the disk file. The ability to open and save previous version
configurations exists for backwards compatibility.