background image

 

 

 

Warning Statements

 

 

 

 

WARNING: 

THE WALL STRUCTURE MUST BE CAPABLE OF SUPPORTING 160 LBS. IF NOT, 
THE WALL STRUCTURE MUST BE REINFORCED. PROPER INSTALLATION 
PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED IN THE 
INSTALLATION INSTRUCTIONS, MUST BE ADHERED TO. FAILURE TO DO SO 
COULD RESULT IN SERIOUS PERSONAL INJURY, OR EVEN DEATH. 

 

 

WARNING: 

SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE 
INSTALLATION OF THIS PRODUCT. USE PROPER SAFETY GEAR AND TOOLS 
FOR THE INSTALLATION PROCEDURE TO PREVENT PERSONAL INJURY. 

 

 

WARNING: 

PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION 
INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD. THE 
INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL 
INJURY AND PROPERTY DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS 
IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE. 

 

 

Indicates that the power plug is to be 
disconnected from the power outlet. 

 

 

Contact Marantz with any questions -  
(630)-741-0300. 

 

 

 

 

 

 

Safety precautions must be taken at 
all times. 

 

 

 

 

 

 

 

 

 

Warning and Caution statements. 

 

 

 

 

 

 

 

Do not install on a structure that is prone to vibration, movement or chance of impact. 
Failure to do so could result in damage to the flat panel display and/or damage to the 
mounting surface. 

 

 

 

Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of 
direct heat energy. Failure to do so may result in damage to the flat panel display and could 
increase the risk of fire. 

 

 

 

At least two qualified people should perform the installation procedure. Injury and/or 
damage can result from dropping or mishandling the flat panel display. 

 

Summary of Contents for WB6001T















Reviews: