Marantz UD8004, Service Manual

Page: 24 / 148

20
(5) Track buffer output mode
Press the
8
or
9
button to select "Y" and switch the track buffer output.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T E Y T r a c k B u f f
(Y=1 : Track buffer being output, 0 : Track buffer output off )
When the 2 button is pressed, the layer above the current layer is displayed. See "7.4 Stopping the mode" (page
21).
(6) Picking up No. display mode
Press the 8 or 9 button to switch to the pickup number display.
The pickup number is a 14-digit number, so it is displayed in two sections.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T G X Y Y Y Y Y Y Y
(X (display position) = 1 : Lower digits, 2 : Upper digits. YYYYYYY: Pickup number)
When the 2 button is pressed, the layer above the current layer is displayed. See "7.4 Stopping the mode" (page
21).
(7) Error log display mode
Press the
8
or
9
button to switch to the error log display.
For Error log No. and description of the displayed measurement results, see "Table 3: Error log details" (page 24).
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
n T H X
(n : Error information No.(1
〜
5), X : Error log No.)
Display when there is no error
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
n T H 1 N o E r r o r
When the 2 button is pressed, the layer above the current layer is displayed. See "7.4 Stopping the mode" (page
21).
(8) Test mode cancel
A con fi rmation message is displayed. Press the
1
button to set, canceling the test mode.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T I 1 R e a l l y ?
When the
2
button is pressed, the layer above the current layer is displayed. See "7.4 Stopping the mode" (page
21).