background image

4

ENGLISH

T h e   s e c t i o n   d e s c r i b e s   t h e   c a r e   a n d 
maintenance tasks that must be performed 
to optimize the operation of your Marantz 
component. 

7

  Cleaning of equipment external 

surfaces

The exterior finish of your unit will last 
indefinitely with proper care and cleaning, 
Never use scouring pads, steel wool, scourging 
powders or harsh chemical agents (e.g., lye 
solution), alcohol, thinner, benzine, insecticide 
or other volatile substances as these wil mar 
the finish of the equipment.  Likewise, never 
use cloths containing chemical substances. 
If the equipment get dirty, wipe the external 
surfaces with a soft, lint-free cloth. 
If the equipment becomes heavily soiled: 

 • dilute some washing up liquid in water, in 

a ratio of one part detergent to six parts 
water. 

  •  dip a soft, lint free in the solution and wring 

the it is damp. 

  •  wipe the equipment with the damp cloth. 

 • dry the equipment by wiping it with a dry 

cloth.

OTHERS

7

 Repairs

Only the most competent and  qualified 
service technicians should be allowed to 
service the factory-trained warranty station 
personnel have the knowledge and special 
facilities needed for repair and calibration of 
this precision equipment. After the warranty 
period has expired, repairs will be performed 
for a charge if the equipment can be returned 
to  normal operation. 
In the event of difficulty, refer to your dealer or 
write directly to the nearest location to you that 
is listed on the Marantz Authorized Service 
Station list. If writing, please include the model 
and serial number of the equipment together 
with a full description of what you think is 
abnormal about the equipment’s behaviour. 

SPECIFICATIONS

 

Power amplifier section

Rated output ........... 50 W (EIAJ 100 Hz, 4 

Ω

)

Line input sensitivity ........................... 220mV

Frequency characteristics ..........38Hz–170Hz

 

Speakers

Enclosure .............................. bass reflex type

Speaker unit ................................ 16 cm cone

Rated impedance .....................................4 

Ω

 

Power supply

Power requirements .............. AC 120 V 60 Hz

Rated power consumption ..................... 60 W

Power consumption in standby mode ... 0.5 W

 

Dimensions / Mass

Width  .............................. 231 mm (9-1/8 ins.)

Height  ....................................203 mm (8 ins.)

Depth  .......................... 312 mm (12-5/16 ins.)

Mass  ....................................6.2 kg (13.7 lbs)

 

Supplied accessories

Audio cable .................................................. 1

Remote control cable ................................... 1

User Guide (this manual) ............................. 1

Warranty card (USA x 1, CANADA x 1) ....... 1

Note:

The speaker nets cannot be removed.

Specifications subject to change without prior notice.

3

(1/8)

7
(5/16)

231 (9-1/8)

312 (12-5/16)

302 (11-15/16)

203 (8)

2 (1/8)

201 (7-15/16)

Unit: mm (inch)

 

Dimensions

SW7001̲U̲01̲Eng.indd   4

SW7001̲U̲01̲Eng.indd   4

07.7.5   0:50:34 PM

07.7.5   0:50:34 PM

Summary of Contents for SW7001








Reviews: