Marantz SA-KI-PEARL-LITE/N1B, Service Manual

Page: 9 / 97

9
DISASSEMBLY
• Disassemble in order of the arrow of the fi gure of following fl ow.
• In the case of the re-assembling, assemble it in order of the reverse of the following fl ow.
• In the case of the re-assembling, observe "attention of assembling" it.
• If wire bundles are untied or moved to perform adjustment or parts replacement etc., be sure to rearrange them neatly
as they were originally bundled or placed afterward.
Otherwise, incorrect arrangement can be a cause of noise generation.
About the photos used for descriptions in the DISASSEMBLY" section.
• The direction from which the photographs used herein were photographed is indicated at "Direction of photograph: ***"
at the left of the respective photographs.
• Refer to the table below for a description of the direction in which the photos were taken.
• Photographs for which no direction is indicated were taken from above the product.
• The photograph is SA8004 K1SG model.
The viewpoint of each photograph
(Photografy direction)
［
View from above
］
Front side
Direction of photograph: B
Direction of
photograph: D
Direction of
photograph: C
Direction of photograph: A
FRONT PANEL ASSY
Refer to "DISASSEMBLY
1. FRONT PANEL ASSY"
and "EXPLODED VIEW"
FRONT PWB
HEAD PHONE PWB
POWER SW PWB
FRONT USB PWB
DAC/AUDIO PWB
Refer to "DISASSEMBLY
2. DAC/AUDIO PWB"
and "EXPLODED VIEW"
DAC/AUDIO PWB
LODER PANEL
Refer to "DISASSEMBLY
1. FRONT PANEL ASSY"
and "EXPLODED VIEW"
MECHA ASSY
Refer to "DISASSEMBLY
5. MECHA ASSY"
and "EXPLODED VIEW"
TOP COVER
DIR/USB-DAC PWB
Refer to "DISASSEMBLY
3. DIR/USB-DAC PWB"
and "EXPLODED VIEW"
DIR/USB-DAC PWB
POWER /uCOM/USB PWB
Refer to "DISASSEMBLY
4. POWER /uCOM/USB PWB"
and "EXPLODED VIEW"
POWER /uCOM/USB PWB