background image

14

[B] UPDATE FIRMWARE FOR Super Audio CD 

MODULE

NECESSARY EQUIPMENT

 •  Update Disc (90M-SA15S2CDR)

WRITING PROCEDURE

Connect the mains cord into the unit.

1. 

Turn on the unit.

2. 

Press the 

3. 

OPEN/CLOSE button to open the tray.

Insert the Update Disc.

4. 

Press the 

5. 

OPEN/CLOSE button to close the tray.

"Upgrade?" is displayed on the front display.  Then Press 

6. 

PLAY button.
Remove the update disc from the tray, when the tray is 

7. 

opened automatically.  At that time ""Upgrade" is blinking 
on the front display.
When update succeeded, the tray is closed automatically.

8. 

And "No Disc" is displayed on the front display.

9. 

Turn off the unit.

10. 

Disconnect the mains cord from the unit.

11. 

[B]  UPDATE FIRMWARE FOR Super Audio CD 

MODULE

NECESSARY EQUIPMENT

 

  Update Disc (90M-SA15S2CDR)

WRITING PROCEDURE

本機に電源コードを接続します。

1. 

本機の電源を入れます。

2. 

OPEN/CLOSE

3. 

ボタンを押しトレイを開きます。

Update Disc

をトレイに乗せます。

4. 

OPEN/CLOSE

5. 

ボタンを押しトレイを閉じます。

フロントディスプレイに

6. 

"

Upgrade?

"

が表示された

ら、

PLAY

ボタンを押します。

トレイが自動的に開いたら

Update Disc

をトレイから取り出

7. 

します。このときフロントディスプレイに

"Upgrade"

と表示

され点滅します。
アップデートが完了すると自動的にトレイが閉じます。

8. 

フロントディスプレイに

9. 

"

No Disc

"

と表示されます。

本機の電源を切ります。

10. 

本機から電源コードを外します。

11. 

Summary of Contents for SA-15S2/F

































































Reviews: